Here you can find an overview of our converters
USB-Nano-485
The USB-Nano-485 changes signals between USB and RS-485. The device is specially designed for the two wire RS-485-bus. For this reason there are no confusing attachment and configuration settings.The attachment is not complicated and debugging is simple in case of communication problems. The LEDs are shows: Power (yellow), Rx (green) and Tx (red).Because of the extremely small dimensions the USB-Nano-485 is particularly usable for mobile use at notebooks. Stationary applications are however likewise possible.For the RS-485 plug you can get a casing if needed to build your own connection cord.
USB-485-Mini/OP
The USB-485-Mini/OP changes signals between USB and RS-485. The device is specially designed for the two wire RS-485-bus. For this reason there are no confusing attachment and configuration settings.The attachment is not complicated and debugging is simple in case of communication problems. In difference to hardly attached devices, the LEDs are always visible.The isolation between USB and RS-485 protects connected devices from overvoltage (i. e. lightning).The small size and low power consumption of the USB-485-Mini makes usage, not only on the desktop pc but also on mobile computers possible.For the RS-485 plug you can get a casing if needed to build your own connection cord.
USB-422/485-Mini/R
The USB-485-Mini/R changes signals between USB and RS-485. The device is specially designed for the two wire RS-485-bus and preferably for the stationary employment. The shippment includes a clip for mounting on a DIN rail.There are no confusing attachment and configuration settings.The attachment is not complicated and debugging is simple in case of communication problems.The isolation between USB and RS-485 protects connected devices from overvoltage (i. e. lightning) and bridges earth differences of potential.The small size and low power consumption of the USB-485-Mini/R makes usage also on mobile computers possible.For the RS-485 plug you can get a casing if needed to build your own connection cord.
LAN-Mini/R-485
The LAN-Mini/R-485 changes signals between LAN and RS-485. The device is specially designed for the two wire RS-485-bus and preferably for the stationary employment. The shippment includes a clip for mounting on a DIN rail.There are no confusing attachment and configuration settings.The attachment is not complicated and debugging is simple in case of communication problems.The isolation between LAN and RS-485 protects connected devices from overvoltage (e.g. lightning) and bridges earth differences of potential.For the RS-485 plug you can get a casing if needed to build your own connection cord.
USB-Nano-485/OP
The USB-Nano-485/OP changes signals between USB and RS-485. The device is specially designed for the two wire RS-485-bus. For this reason there are no confusing attachment and configuration settings.The attachment is not complicated and debugging is simple in case of communication problems. In difference to hardly attached devices, the LEDs are always visible.The isolation between USB and RS-485 protects connected devices from overvoltage (i. e. lightning).The small size and low power consumption of the USB-Nano-485/OP makes usage, not only on the desktop pc but also on mobile computers possible.For the RS-485 plug you can get a casing if needed to build your own connection cord.
USB-Nano-232-3V
The USB-Nano-232 changes signals between USB and RS-232. The device is specially designed for the two wire RS-232-bus. For this reason there are no confusing attachment and configuration settings.Please notice there are no handshake signals such as RTS, CTS, ...The attachment is not complicated and debugging is simple in case of communication problems. The LEDs are shows: Power (yellow), RxD (red) and TxD (green).Because of the extremely small dimensions the USB-Nano-232 is particularly usable for mobile use at notebooks. Stationary applications are however likewise possible.For the RS-232 plug you can get a casing if needed to build your own connection cord.
USB-Nano-232-5V
The USB-Nano-232 changes signals between USB and RS-232. The device is specially designed for the two wire RS-232-bus. For this reason there are no confusing attachment and configuration settings.Please notice there are no handshake signals such as RTS, CTS, ...The attachment is not complicated and debugging is simple in case of communication problems. The LEDs are shows: Power (yellow), RxD (red) and TxD (green).Because of the extremely small dimensions the USB-Nano-232 is particularly usable for mobile use at notebooks. Stationary applications are however likewise possible.For the RS-232 plug you can get a casing if needed to build your own connection cord.